Eltherington CWCT - 3 New Systems Tested

We have pleasure in announcing that Eltherington have now CWCT tested our new rainscreen planking systems.

With 3 new tested system on offer in an unprecedented range of colours and finishes, we really do have all bases covered for specifying a façade that will bring your building to life.When installed with our Hilti-Eurofox subframe, these innovative systems allow a precise and efficient installation, with perfect joint lines and accurate tolerances.
 

CPS - Clip Plank System

Clip Plank SystemThe Eltherington CPS is a folded metal plank that is secretly fixed on the plank returns with our polyamide clips.  
 
This engineered system allows for a larger plank face and joint detail resulting in a striking and bespoke linear design.  
 
The CPS is a bottom to top system when installed horizontally, meaning the install starts at the bottom of the elevation and each plank locks in to the clip below it. 
 
Our horizontal and vertical Hilti-Eurofox subframe will accommodate the planks being installed in any orientation whilst applying the same clip fixing method.
 

Material                      Aluminium, Steel
Finish                         PPC, Pre-paint, Corten, Rimex
Thickness                  1.2 / 1.5 / 2mm
Face height                150 to 450mm
Face length                4000mm max
Install method            Bottom > Up

IPS – Interlocking Plank System                                                                   Interlocking Plank System

 

The Eltherington IPS is a pressed metal plank that is secretly fixed within the
interlocking male and female joint. 

Available in a range of materials, finishes, face heights and lengths, this
system can be fixed horizontally or vertically when installed on to our Hilti-Eurofox
subframe.

The IPS is a top-down system which means the install starts at the top of the elevation,
interlocking the top of one plank into the bottom of another.

Material                      Aluminium, Steel
Finish                         PPC, Pre-paint, Corten, Rimex
Thickness                  1.2 / 1.5mm
Face height                150 to 350mm
Face length                4000mm max
Install method            Top > Down

 

EPS – Extruded Plank System

The Eltherington EPS uses 2mm extruded aluminium that allows for a quick, simple and secret fix install

The standard plank returns along with our extruded vertical profile ensures an accurate 8mm vertical and
horizontal joint gap

The EPS lends itself to use in all areas including ground floor vulnerable areas due to the impact resistance
of extruded aluminium.

The system is also a bottom to top install. Starting at the bottom of the elevation each plank is fed into the
male/female plank return below it and secured by mechanical fixings through site drilled slots into our
extruded Hilti-Eurofox sub-frame.

 

Material,                     Aluminium
Finish                         PPC
Thickness                   2mm
Face height                210mm only
Face length                6010mm max
Install method             Bottom > Up

 

All our aluminium and steel planking materials are class A1 fire rated and are independently tested and accredited to CWCT standard.

 

Please consult Eltherington Architectural for full install methods, panel sizes and finish options.

 

Back to main news